GAGE BLOCK HEADER PAGE
PREVIOUS
NEXT
GENERAL CATALOG
Heavy Duty - English System
Gage Block Sets in Case
 These are primarily used
 to assemble exclusive
 Webber fixtures.

 Precision "yardsticks"
 and height gages can be
 built up to a required
 dimension by wringing
 blocks together and
 using eccentric clamps
 to lock them into place.
 All blocks over 1" have
 1/4" holes to accept
 eccentric clamps.  All
 blocks 6" and larger
 have insulated grips to
 minimize temperature
 variations when handling.

 Precision scribers and
 dividers can be made in
 a few seconds. Snap
 gages for inside or
 outside measurement
 can easily be assembled
 using accessories like
 the eccentric clamps,
 quick acting clamp, and
 a pair of half-round jaws.
HD 46.A1X
SCRIBER & CENTER POINT BUILDUP
ECCENTRIC CLAMP
Catalog
No.
 Grade 
 Blocks 
in Set
 Measuring Range
Blocks included in Set
HD 42.A1X
0
42
 .200 to 24.000 in Steps of .001
 .300 to 24.000 in Steps of .0001
   9 Blocks .1001 thru .1009 (Steps of .0001)
   9 Blocks .101 thru .109 (Steps of .001)
   9 Blocks .110 thru .190 (Steps of .010)
   9 Blocks .100 thru .900 (Steps of .100)
   4 Blocks 1.000 thru 4.000 (Steps of 1")
   2 Blocks  6.000 
Accessories Included:
   2 Half-Round Jaws   .500" Radius
   1 Scriber Point
   1 Center Point  .500" C/L
   1 Quick Acting Clamp
   1  Base Block, 1-1/2" Thick
   6 Eccentric Clamps
HD 44.A1X
0
44
 .200 to 36.000 in Steps of .001
 .300 to 36.000 in Steps of .0001
 Same as in HD 42.A1X set above, except
    4  Blocks 6.000
    8  Eccentric Clamps
HD 46.A1X
0
46
 .200 to 48.000 in Steps of .001
 .300 to 48.000 in Steps of .0001
 Same as in HD 42.A1X set above, except
    6  Blocks 6.000
   10 Eccentric Clamps
HD 84.A1
0
84
 .100 to 12.000 in Steps of .001
 .200 to 12.000 in Steps of .0001
 .300 to 12.000 in Steps of .00005
   2 Blocks  .100 croblox® Wear Blocks
   1 Block   .10005
   9 Blocks .1001 thru .1009 (Steps of .0001)
 49 Blocks .101 thru .149 (Steps of .001)
 19 Blocks .050 thru .950 (Steps of .050)
   4 Blocks 1.000 thru 4.000 (Steps of 1")
   3 Eccentric Clamps
HD 84.A1X
0
84
 .100 to 12.000 in Steps of .001
 .200 to 12.000 in Steps of .0001
 .300 to 12.000 in Steps of .00005
Same as above HD 84.A1 Set, except
   2 Half-Round Jaws   .500" Radius
   1 Scriber Point
   1 Center Point  .500" C/L
   1 Quick Acting Clamp
   1  Base Block, 1-1/2" Thick
   5 Eccentric Clamps
NOTE:  Cases for HD 84.A1 and HD 84.A1X sets have slots for six 6.000" Heavy Duty gage blocks.
SNAP GAUGE
WEAR BLOCKS
Size
 Catalog Number 
.050"
HDC .050 WA1
.100"
HDC .100 WA1
HDC .100 WA1
PREVIOUS
GAGE BLOCK HEADER PAGE
NEXT
GB8
©2008, Webber Gage Division, The L. S. Starrett Co, Cleveland, Ohio , 44145
INDEX